The tab on the black bushing must be oriented so that it will fit through the keyed opening on the carriage. If the black bushing does not fit, the slotted end of the pickup roller�s shaft is not properly inserted over the drive shaft. If necessary, repeat step 4. Figure 7-20 Replacing the Black Bushing
6
Rotate the black bushing forward until it locks in place.
Figure 7-21 Locking the Black Bushing in Place
7
Slide the white bushing to the right until it goes through the carriage opening (see figure 7-22). The tab on the white bushing must be oriented so that it will fit through the keyed opening on the carriage. Rotate the white bushing forward until it locks in place.
